BLUSENTRY

Stop leaks before they start.

Water loss prevention for condominiums and multi-tenant properties. Wireless leak sensors, an automatic water shut-off valve and a mobile app in every unit — plus one dashboard for the entire property.

Request a Demo See How It Works
Built for condominium associations and property management companies.
BluSentry mobile app showing water status on, the main shut-off valve open, flow rate, daily water use and six dry leak sensors
The system

Protection in every unit. One view of the whole property.

BluSentry installs a small, self-contained protection system in each unit and connects every unit to one platform. Owners control their own water from their phone. Your management team and board see every building, every unit, all the time.

Harbor Pointe · Building B

every unit protected
FL 4
401
402
403
404
FL 3
301
302
303
304
FL 2
201
202
203
204
FL 1
101
102
103
104
Water on, all dry Water off by owner Leak — valve closed

Unit owners

Control water, schedules and alerts from the iOS or Android app.

Property management

Monitor and respond to every unit from one dashboard.

Board & maintenance

Anyone you designate gets escalated alerts and reports.

BluSentry motorized shut-off valve mounted on a copper water line
01 · Shut-off valve

Automatic water shut-off

A motorized actuator mounts on the unit’s main ball valve — no cutting pipe. It closes automatically on a leak, or with one tap in the app.

BluSentry wireless leak sensor with sensing cable
02 · Leak sensors

Wireless leak sensors

Placed at every risk point in the unit. A sensing cable detects water along its entire length, not just at one spot.

03 · Unit controller

Cellular controller, battery backup

Links the sensors and valve and reports over its own 4G connection — no building or owner Wi-Fi required. A backup battery keeps it running through outages.

04 · App & dashboard

Owner app, manager dashboard

Owners run their unit from their phone. Managers and board members get a live view of the whole property, with alerts and reports.

Why it matters

One unit’s leak becomes everyone’s problem.

In a multi-story building, water doesn’t stay put. A failed supply line on the fourth floor travels through ceilings and walls into the units below. BluSentry protects your unit owners and their neighbors.

  • Damage spreads to many units

    A single leak can cause hundreds of thousands of dollars in damage across several homes and common areas.

  • Months of construction

    Drying, demolition and rebuilding displace residents and disrupt the whole building.

  • Insurance claims and disputes

    Claims between owners, the association and carriers take time and can drive up premiums.

Potential insurance discounts

Many carriers offer discounts for properties with a water loss prevention system. Ask your carrier what BluSentry could mean for your policy.

401402 301302 201202 LOBBY101 Leak source Ceiling damage Walls & floors Common areas
Water from one unit can reach every floor below it.
Remote control

Never forget to shut your water off again.

  • Your water, from your phone

    Shut water off or turn it back on from anywhere. Set schedules and get reminders so it’s off when nobody needs it.

  • 4G cellular, not Wi-Fi

    Each unit has its own cellular connection, so protection doesn’t depend on an owner’s router or the building network. Redundant systems keep every unit reachable.

  • Battery backup

    Power outage? The controller keeps monitoring and can still close the valve.

A hand holding a phone showing a BluSentry notification: everyone has left Unit 402 and the water is still on, with a Shut off water button
Multi-zone leak detection

A sensor at every place leaks start.

Most water damage starts at an appliance or fixture. BluSentry puts a wireless sensor at each one, and every sensor can shut off the unit’s water.

A/C unitAir handler & drain line
Water heaterTank & supply lines
Water softenerBrine tank & valve
Refrigerator & freezerIce maker & water lines
Washing machineSupply hoses & drain
DishwasherSupply line & pump
BluSentry wireless leak sensor with a sensing cable
Sensing cable detects water along its full length
Smartwatch showing a BluSentry alert: water heater leak in Unit 402, water shut off automatically, with an Acknowledge button
24/7 monitoring

It knows what normal looks like.

  • AI that learns each unit’s habits

    BluSentry learns when water normally runs in each unit and spots when it’s on when it shouldn’t be — like water running at 3 AM in an empty unit.

  • Asks the owner first

    The owner gets an app notification asking if they’d like to shut the water off. One tap and it’s done.

  • Every unit, around the clock

    All units are monitored for leaks 24/7. When a sensor gets wet, the valve closes automatically.

  • Escalation until someone responds

    Alerts go out by app notification, email and text, and escalate from the owner to property management and board members. Every leak alert requires acknowledgment, so you know someone is on it.

Example escalation · Unit 302Timing set per property

  1. Leak detected at water heater

    Valve closed automatically. Water is off.

  2. Unit owners notified

    AppTextEmail

  3. No response — property manager alerted

    AppTextEmail

  4. Board members and maintenance alerted

    TextEmail

  5. Acknowledged by property manager

    Maintenance dispatched. Response logged for the unit’s history.

Control

Flexible enough for how people really live.

Schedules and overrides

Set water on and off times for each unit. Owners can override a schedule from the app whenever plans change.

Guest mode for rentals

Give renters and guests water on a schedule that matches their stay. The water shuts off when they leave.

Location-based reminders

Owners can opt in to location reminders. If both owners are away and the water is on, BluSentry asks if they want it off.

For property managers & boards

Every unit. One dashboard.

Your property management company and anyone you designate get a full dashboard to monitor and respond to every unit in the property.

  • See every unit at a glance — water status, sensors and alerts across all buildings.
  • Respond from one place — acknowledge alerts, shut off water and assign maintenance.
  • Catch issues early — low batteries, offline devices and unusual water use flagged before they become problems.
  • Report to the board — history for every unit, ready for meetings and insurance.
Reliability

Redundancy at every layer.

A leak doesn’t wait for the Wi-Fi to come back. BluSentry is built so no single failure leaves a unit unprotected.

Neighbor mesh

Units look out for each other.

BluSentry units communicate with neighboring units over Bluetooth as a backup path. If one unit’s controller goes offline, its neighbors can still pick up and report a leak — a building-wide safety net that gets stronger with every unit protected.

Its own 4G connection

Every unit controller talks to BluSentry over cellular, independent of owner Wi-Fi and building networks.

Battery backup

When the power goes out, the controller keeps watching the sensors and can still close the valve.

Local shut-off and self-checks

A wet sensor closes the valve right in the unit, even without a connection. Regular self-diagnostics confirm every device is working.

Who we serve

A complete water loss prevention solution for multi-tenant properties.

Condominium associations

Protect the building, the owners and the association’s budget with a system that covers every unit.

  • Board alerts and reporting
  • Fewer claims between neighbors
  • Potential insurance discounts

Property management companies

Monitor every property in your portfolio from one dashboard and respond before small problems grow.

  • Multi-property dashboard
  • Escalations with acknowledgment
  • Maintenance and device reports

Your unit owners

Every owner gets the BluSentry app to control their water, set schedules and respond to alerts.

  • Remote shut-off and schedules
  • Guest mode for rentals
  • iOS and Android
FAQ

Common questions

Don’t see yours? We’re happy to walk your board or management team through the details.

Do we need to cut into plumbing to install BluSentry?

No. The shut-off actuator mounts on each unit’s existing main ball valve, and the leak sensors are wireless. There’s no pipe cutting and no new plumbing.

What happens if Wi-Fi or power goes out?

BluSentry doesn’t use Wi-Fi. Each unit controller has its own 4G cellular connection and a backup battery, and a wet sensor closes the valve locally even without a connection. Neighboring units also act as a backup path over Bluetooth.

Who gets alerted when a leak is detected?

The unit owners first, then property management, board members and maintenance according to the escalation rules you set. Alerts go out by app notification, email and text, and each leak alert must be acknowledged.

Can owners still control their own water?

Yes. Owners use the BluSentry app to turn water on and off, set schedules, enable guest mode and choose reminders. Location reminders are opt-in.

Will this lower our insurance costs?

Many carriers offer discounts for properties with a water loss prevention system. Ask your carrier or agent how BluSentry applies to your policy.

How does management see all of the units?

Your management company and anyone you designate get a web dashboard showing every building and unit, with live status, active alerts, device health and reports.

Protect every unit in your property.

See how BluSentry would work in your buildings. We’ll walk your board or management team through the system, installation and pricing for your property.

Request a Demo Contact Us